A quick look at your solar generation meter once a month could save you months of lost payments. Your generation meter is the small box, usually near your fuse board or inverter, that records every unit (kWh) your solar panels produce. Your energy supplier pays your generation income based on the readings from this meter, so if it stops counting, your payments stop too.
How to check your meter
There are two things to look at: the numbers on the screen and the red light.
The numbers should be going up. The display shows the total kWh your system has generated since it was installed. Note the reading, then check again a few days later. On any day with some daylight, the number should have increased.
The red light tells you what the meter is detecting:
| What you see | What it means |
| Flashing red light | Your panels are generating electricity. The light flashes faster on sunny days. |
| Solid red light | The meter has power but no electricity is coming from the panels, which is normal when it’s dark outside. |
| No light and a blank display | The meter has no power. This needs checking. |
A solid light at night is nothing to worry about. A solid light in the middle of a bright day, or numbers that haven’t moved for several days, may mean your system isn’t generating.
Why it matters
If your meter fails and nobody notices, you could lose the generation income for that whole period. Your supplier can only pay for what the meter has recorded. If the meter has stopped and you haven’t checked it or sent a reading for several months, there is usually no record to prove what your panels produced, and that income can’t be recovered.
Regular checks and readings mean a fault is caught within weeks, not months. A dated reading also gives your supplier a clear last-known figure if the meter ever needs replacing.
A simple monthly routine
- Pick a set day each month, such as the 1st, and put a reminder in your phone.
- Check the display is on and the total kWh has gone up since last time.
- Take a clear, dated photo of the meter display.
- Submit the reading to your energy supplier as often as they ask, usually quarterly.
If the display is blank, the numbers haven’t moved, or the red light is solid on a bright day, first check that the trip switches in your consumer unit are on. If that doesn’t fix it, please don’t try to repair, disconnect or remove any part of the system yourself. Contact the East Green Energy team with a photo of your meter and inverter, and we’ll help get your system back online as quickly as possible.

